This unit is specially designed to clean-cut whole kernels of sweet corn by removing any pieces of cob and husk automatically while breaking up any clusters of cut kernels. The unit is equipped with water spray bars over special, rotating UHMW rolls. Powered by a properly sized electric motor. All stainless steel construction, framework and guards. Capacity of this unit is typically 25,000 lbs. to 30,000 lbs. per hour.

DUAL NUBBIN ELIMINATOR/LENGTH GRADER

Each unit is designed to handle 30 to 35 tons per hour of husked sweet corn.This unit consists of a negatively sloped infeed pan to evenly spread the flow on two (2) 28 lane alignment pans; the alignment pans each have an adjustable live roller powered by a ½ hp motor coupled to the roller shaft by a hollow shaft gear box. The first alignment pan & roller is set to remove nubbins, the second is set to length grade. Dual Ajax vibrating eccentrics are powered by a 1-1/2 hp motors. Frame is constructed of mild steel, hot dipped galvanized.

NUBBIN ELIMINATOR FOR GRADING OUT SHORT COBS FROM SYSTEM

Features:

• Stainless steel bed
• 45” long impact section
• Water spray bar
• Adjustable live roller(removal of short cobs) - Powered by one ¼ hp 3 phase, geared electric motor
• #12 Ajax vibrating shaker drive - Powered by one 1½ hp., 3 phase electric motor
• Hot dipped galvanized mild steel
• Isolation mounts & brackets

MODEL NO.	TONS PER HOUR	DIMENSIONS	LANES
MODEL 300	30 to 35	86” wide X 9’-0”	28
MODEL 200	20 to 25	62” wide X 9’-0”	20
MODEL 125	12 to 15	40” wide X 9’-0”	13